79.060 Wood-based panels 木基板材
ES 949 - 1/2005
Plywood part: 1 classification by surface appearance for soft and hard wood
胶合板第 1 部分：根据软木和硬木表面特征分类根据表板为针叶木和阔叶木分类
ISO 2426-1/2/3 -2003
ES 949 - 2/2005
Plywood part: 2 tolerances on dimensions
胶合板第 2 部分：尺寸和公差
ISO 1954/1999
ES 949 - 3/2005
Plywood part: 3 bonding quality - test methods and requirements
胶合板第 3 部分：测试方法和要求
ISO 12466-1/2-1999
ES 949 - 4/2005
Plywood part: 4 vocabularies
胶合板第 4 部分：术语
ISO 2074/1972
ES 949 - 5/2005
Plywood part: 5 fabrication and requirements
胶合板第 5 部分：制作造和要求
*
ES 906 - 2/2006
Wood – based panels and particle board part 2:- determination of density
木质多层板和刨花板第 2 部分：密度的测定
ISO 19424；ISO 16999
ES 2763 - 4/2007
Methods of test for plywood - part 4: Test for adhesion of plies(knife test).
胶合板检测的方法-第 4 部分：板间粘合度检测（刀齿检测）
*
ES 2765/1994
Plywood for marine craft
航海用胶合板
BS 1088-4079/1966
ES 3596 - 1/2001
Methods of testing particleboards and fibreboards- Part 1: Determination of swelling in thickness after immersion in water.
刨花板和纤维板的测试方法第 1 部分：浸泡在水中后，肿胀的厚度测定
*
79.060.10 Plywood 胶合板
ES 2763 - 1/2007
Methods of test for plywood - part 1: Determination of moisture content.
胶合板检测的方法-第 1 部分：含水率的检测 ISO 16999 Wood–based panels–Sampling and cutting of test pieces,木质板材-试样 的抽取和剪切；ISO 1743-1/1983 Methods of test for plywood Part :1 Determination of density and moisture content，胶合板检测的方法-第 1 部分：密度和水分含量的检测
81 Glass and ceramics industries 玻璃和陶瓷工业
__________________________
ES 814/2003
Determination of annealing point and strain point of glass
玻璃退火点和应变点的测定
*
ES 837/2003
Glossary and definitions of terms relating to glass industry
玻璃行业的相关术语和词汇
*
ES 4690 - 4/2007
Test method of mortar part (4): test method for absorption of chemical – resistant mortars
砂浆的试验方法第 4 部分:耐化学腐蚀砂浆的吸收性试验方法
*
ES 4690 - 4/2007
Test method of mortar part (4): test method for absorption of chemical – resistant mortars
砂浆的试验方法第 4 部分:耐化学腐蚀砂浆的吸收性试验方法
*
ES 53/2003
Dense refractory materials used in the ovens of glass industry
玻璃工业用高密耐火原料
*
ES 59/2004
Chemical analysis of refractory materials
耐火材料的化学分析
*
ES 52/2005
Definition and terminology relating to refractories
耐火材料的相关定义和术语
*
ES 4690-5/2007
Test methods of mortar part (5) : determination of bond strength for chemical – resistant mortars
灰浆测试方法第 5 部分：耐化学腐蚀灰浆粘结强度的试验方法
ASTM C 321/2005 Standard test method for bond strength of chemical – resistant mortars，耐化学腐蚀灰浆粘结强度的试验方法
ES 2150-1/2007
Determination of cold crushing strength for dense, shaped refractory products part (1) referee test without packing
致密定形耐火制品－常温耐压强度测定，第 1 部分：无衬垫法
ISO 10059–1/1992 Dense, Shaped Refractory Products–Determination of Cold Compressive Strength , Part (1) : Referee Test without Packing ，致密定形耐火制 品－常温耐压强度测定，第 1 部分：无衬垫仲裁法
ES 2150-2/2007
Determination of cold crushing strength for dense, shaped refractory products part (2) test with packing
致密定形耐火制品－常温耐压强度测定，第 2 部分：衬垫法
ISO 10059–2/2003 Dense , Shaped Refractory Products–Determination of Cold Compressive Strength , Part (2) : Test with Packing，致密定形耐火制品－常温耐压 强度测定，第 1 部分：衬垫法
若需要进一步信息，欢迎扫码联系
__________END___________
标签：
