ES 2053/2005 

GENERAL PURPOSE METRIC SCREW THREADS – GENERAL PLAN 

普通米制螺纹总方案 

ISO 68-1 :1998 ISO general purpose screw threads – Basic profile – part 1 Metric  screw thread，一般用途米制螺纹.基本牙形.第 1 部分:米制螺纹；ISO 262:1998 ISO general  purpose Metric threads – Selected sizes for screws ,Bolts and nuts，一般用途米 制螺纹螺钉、螺栓和螺母的选用尺寸；ISO724:1993 ISO general purpose Metric screw  threads – Basic dimen,一般用途米制螺纹基本尺寸；ISO 261 – 1998

ES 5812 - 1 / 2007 

ISO GENERAL PURPOSE SCREW THREADS - BASIC PROFILE - PART:1 METRIC SCREW THREADS 

ISO 一般用途螺纹.基本剖面图.第 1 部分:米制螺纹 

ISO 965-1: 1998, ISO general purpose metric screw threads - Tolerances - Part 1:  Principles and basic data，ISO 一般用途米制螺纹 误差 第 1 部分原则和基本数据；ISO  5408 : 1983 , Cylindrical screw threads - Vocabulary ，圆柱螺纹 词汇

21.060 Fasteners 紧固件

ES 1096/1993 取消 

MANILA ROPES 

马尼拉绳, 马尼拉麻绳 

*

ES 750 / 1996 

The chemical quantitative analysis for double mixtures for double substrate 

两种生源的混合物的定量化学分析方法

*

ES 881 / 1967 

Plastic medicament containers 

药剂塑料容器 

*

ES 966 - 1 / 1969 作废 

Measurement of the electrical properties of electronic tubes and valves Part 1:  measurement of forward electrode current 

电子管和电子阀的电性能测量 第 1 部分 正向电流的测量

*

ES 1076 / 1995 作废 

Mortise door lock (canceled 2006) 

榫眼门锁

*

ES 5722 / 2007 

Steel wire nails loose nails for general applications 

钢丝钉，一般用途的散装钉 

BS EN 10230 – 1 / 2000 Steel wire nails Part 1 : Loose nails for general applications,  钢丝钉第 1 部分:一般用途的散装钉

ES 320 / 2005 作废 

Household electric refrigerators 

家用电冰箱 

ISO: 8178/1991 amd 1997

ES 2136 / 1992 作废 

Chip breaker 

断屑槽 

ISO: 3002-1

__________________

ES 433 / 2007 

Cross recessed cheesee head screws 

十字槽圆柱头螺钉 

ISO 225: 1983, Fasteners – Bolts, screws, studs and nuts-Symbols and designations  of dimensions，紧固件螺栓、螺钉、螺柱及螺母尺寸代号和标注；ISO 261, ISO  general-purpose metric screw threads-General plan，通用米制螺钉 总体方案；ISO 888 :  1976, Bolts , screws and studs – Nominal lengths and thread lengths for general； 螺栓、螺钉、螺柱公称长度和一般用途螺栓的螺纹长度, ISO 7048 / 1998 cross recessed  cheese head screws,十字槽圆柱头螺钉

ES 5062 / 2006 

Slotted Raised countersunk (Oval) head tapping screws (common head style) 

开槽半沉头自攻螺钉 (通用头型) 

ISO 225； ISO 1478；ISO 2702；ISO 3269；ISO 1483

ES 5241 / 2006 

Heat-treated steel tapping screws - mechanical properties 

热处理钢自攻螺钉-机械性能 

ISO 1478/83；ISO 6507 – 1，1/16

ES 5434 / 2006 

Plain washers for high - strength structural bolting, hardened 

淬火并回火的高强度栓接结构用平垫圈 

ISO 887；ISO7416, ISO10644；ISO 7415/1984

ES 599/2005 

Slotted countersunk (flat) head tapping screws (common head style) 

开槽沉头自攻螺钉(通用头型) 

ISO1478 Tapping screws thread，自攻螺钉用螺纹；ISO 2702 Heat-treated steel tapping  screws – Mechanical properties，热处理钢自攻螺钉.机械性能；ISO 3269 Fasteners – Acceptance inspection ；紧固件 - 验收检查； ISO 4042 Threaded components – electroplated coatings components，紧固件.电镀层；ISO 4757 Cross recesses for  screws，螺钉用十字槽

ES 2188/2005 

Mechanical properties of fasteners made of carbon steel and alloy steel- set screws  and similar threaded fasteners not under tensile stresses 

碳钢和合金钢制成的紧固件的机械特性.不超过拉伸强度的紧固螺纹和类似螺纹紧固件 

ISO 965-3/1998 General purpose metric screw threads Tolerances Part 3: Deviations  for constructional threads，一般用途米制螺纹-- 公差.第 3 部分: 结构螺纹的偏差；ISO  4948-1/1982 Classification of steels into unalloyed and alloy steels based on  chemical composition，钢分类-第 1 部分：根据化学成分钢分为非合金钢和合金钢；ISO  6506/1981 Metallic materials - Hardness test - Brinell test，金属材料―硬度试验― 布氏试验；ISO: 898/1998

ES 2493/2005 

Hexagon nuts – product grade C 

六角螺母－C 级 

ISO 225:1983, Fasteners-Bolts, screws, studs and nuts – Symbols and designations  of dimensions，紧固件螺栓、螺钉、螺柱和螺母尺寸代号和标注；ISO 724:1993 ISO generalpurpose metric screw threads-Basic dimensions，一般用途米制螺纹基本尺寸；ISO 898  -2:1992 Mechanical properties of fasteners-Part 2 : Nuts with speci，紧固件机械 性能 第 2 部分:规定保证载荷值的螺母. 粗牙螺纹；ISO 4034: 1999 Hexagon nuts-product  grade C，六角螺母－C 级

ES 430/2005 

Plain Washers for metric bolts screws and nuts for general purposes – general plan

通用米制螺栓、螺钉和螺母用的平垫圈总方案 

ISO 273:1979, Fasteners-Clearancel holes for bolts and screws，固件螺栓和螺钉通 孔；ISO 887 / 2000

__________

ES 431/2006 

Plain washers, chamfered, hardened and tempered for high-strength structural  bolting 

高强度结构栓接用淬硬和回火的倒角平垫圈 

ISO 4759 – 3 , Tolerances for fasteners – Part 3 : washers for metric bolts , Screws  and nuts with thread diameters ≥ 1 and ≤ 150mm – product grades A and C,紧固 件公差.第 3 部分:螺纹尺寸 1-150mm 螺栓、螺钉和螺母用平垫圈.产品等级 A 和 C；ISO 7416  -1984 Plain washers, chamfered, harden,高强度结构螺栓用淬硬和回火的倒角平垫圈

ES 2492/2005 

Hexagon thin Nuts (unchamfered) - Product grade B 

六角薄螺母（无倒角型）—产品等级 B 级 

ISO 225 : 1993, Fasteners-Bolts, screws, studs and nuts-Symbols and designations  of dimensions，螺纹紧固件的尺寸代号与标注；ISO 724: 1993, ISO general-purpose metric  screw threads-Basic dimensions，一般用途米制螺纹基本尺寸；ISO 965-1:1998, ISO  general purpose metric screw threads-Tolerances-Part1: Prin,一般用途米制螺纹-公 差.第 1 部分: 原则和基本数据；ISO 4036/ 2000

ES 2409/2005 

Hexagon nuts, style 2 – product grade A and B  

2 型六角螺母—产品等级 A 和 B 级 

ISO 225:1983, Fasteners – Bolts, screws, studs and nuts – Symbols and designations  of dimensions，紧固件螺栓、螺钉、螺柱和螺母尺寸代号和标注；ISO 724:1993 ISO generalpurpose metric screw threads – Basic dimensions，一般用途米制螺纹基本尺寸；ISO 898  -2:1992；ISO 4033: 1999

ES 6311 / 2007 

Flat countersunk head rivets with nominal diameters from 3 to 5 mm 

公称直径 3~5mm 扁沉头铆钉 

DIN 675 / 1993 Flat Countersunk head rivets with nominal diameters from 3 to 5 mm 

DIN 675 / 1993 公称直径 3~5mm 扁沉头铆钉

ES 6312 / 2007 

Countersunk head rivets with nominal diameters from 1 to 8 mm 

公称直径 1~8mm 沉头铆钉 

DIN 101 , Rivets -technical delivery conditions，铆钉-技术交货条件；DIN 1654 Part  2 , Cold heading and cold extruding steel ; technical delivery conditions for killed  unalloyed steel not intended for heat treatment，第 2 部分 冷加工和冷挤压 不用于 热处理的镇静非合金钢技术交货条件；DIN 1790 Part 1, Wrought aluminum and aluminum  alloy,第 1 部分 锻铝和铝合金；DIN 661 / 1993 Countersunk head rivets with nominal  diameters from 1 to 8 mm，公称直径 1~8mm 沉头铆钉

ES 319 / 2007 

Round head rivets with nominal diameters from 1 to 8 mm 

公称直径 1~8mm 圆头铆钉 

DIN 101 , Rivets -technical delivery conditions，铆钉-技术交货条件；DIN 1654 Part  2 , Cold heading and cold extruding steel ; technical delivery conditions for killed  unalloyed steel not intended for heat treatment，第 2 部分 冷加工和冷挤压 不用于 热处理的镇静非合金钢技术交货条件；DIN 1790 Part 1, Wrought aluminum and aluminum  alloy,第 1 部分 锻铝和铝合金；DIN 661 / 1993 Countersunk head rivets with nominal  diameters from 1 to 8 mm，公称直径 1~8mm 沉头铆钉

ES 6380 / 2007 

Mushroom head rivets with nominal diameters from 1.6 to 6 mm

凸圆头铆钉.公称直径 1.6 至 6mm 

DIN 674/1993 Mushroom Head Rivets With Nominal Diameters From 1.6 To 6 mm，凸圆 头铆钉.公称直径 1.6 至 6mm

若需要进一步信息，欢迎扫码联系

______END________

标签：